The B126-002-INT 2-Port HDMI over Cat5/Cat6 Extender/Splitter works with Tripp Lite B126-Series remote receivers to split a single HDMI audio/video signal into two separate signals. Its ideal for digital signs trade shows presentations retail settings and other applications where the video source is located farther than conventional cables allow or that require multiple displays connected to one source. It uses HDMI cable (see Tripp Lites P568-Series) to connect to the source and Cat5e/6 cable to transmit to the remote monitors (for best results use 24 AWG solid-wire Cat5e/6 cable such as Tripp Lites N202-Series).
When used with Tripp Lites B126-1A0 or B126-1A0-WP-1 active remote receivers the Extender/Splitter can extend a 1080i (60 Hz) signal up to 200 feet (61 m) a 1080p signal (60 Hz) up to 150 feet (45.7 m) and a 3D signal up to 125 feet (38.1 m). With a B126-1P0 or B126-1P0-WP-1 passive remote receiver it can extend a 1080i (60 Hz) signal up to 100 feet (30.5 m) and a 1080p (60 Hz) signal up to 50 feet (15.2 m). Add up to three B126-110 remote repeaters to each channel to fully extend the signal range or add more displays.
In addition to high-definition video the B126-002-INT supplies full rich stereo and 7.1-channel surround sound (multi-channel or PCM) audio. Easy to set up with no software or drivers to install. Mounts to a wall rack or pole using the included hardware. Features
- 2-Port HDMI over Cat5-6 Extender-Splitter TX for Video & Audio - Intl. Power - Up to 200 ft.
- Perfect for digital signs trade shows and retail settings
- Supports high-definition video reso